Smartlink 4000 - Cellular remote telemetry module for Series 4400 capacitor controls

Smartlink 4000 capacitor control with two way communications

The Smartlinkä 4000 add reliable, cost-effective 2-way communications to new or existing Fisher Pierce Series 4400 capacitor controls for monitoring, control, and automation of capacitor switches. It is an integrated Remote Telemetry Module that allows for local and remote control of capacitor controls.

Smartlink 4000 uses 2-way radio technology from Telemetric to communicate over digital cellular data networks. The secure web-based application supports automatic alarm or status reporting sent via email, pager, or text message.


	Remote trip/close
	Selection of remote or local operating mode
	Automatic status point change reporting
	User-configurable time scheduled reports of selected digital and/or analog status points
	Query on-demand reading of selected status points
	Available as field-upgradeable "snap-on" replacement door kit or pre-installed and complete from the factory

Specifications
Rules-Based Processing of Digital & Analog Status Points
Alarm report on digital status point change
Analog range change rules to report analog value changes based upon 3 user defined set point values or a stair-step value
Cellular Data Network
Transmit power: 0.6 to 1.2W
Supports both 850/1900 MHz GSM/GPRS & EDGE digital packet data networks
Nationwide GPRS support via Cingular Wireless and affiliated roaming partners with a variety of application data plans
50 Ohm SMA antenna connector
Dual-band 850/1900 MHz antenna included
Local Serial Port
RS-232 communications port for local configuration
Windows based local configuration software included with RTM
Intelligent Web Server
Data is secure and password protected
Server authentication using 128-bit encryption key validation
E-mail, text message, or pager notification options
Electrical/Environmental
100 – 135 VAC, 60 Hz
Power provided via 120V connection to 4400 control power (front panel connector)
Surge withstand: ANSI/IEEE C37.90.1-2002, 4kV min. @ 1.2/50 μs surge
Operating temperature range: -40º to +70ºC
Enclosure Door Kit
Lexan replacement door for meter socket enclosure
NEMA 3R Rating

	Digital Outputs to the 4400 control
1	Change Mode Switch Bank Reset Daily Close Count	Remote/Local Close/Trip Clear Neutral Current Lockout
	*Manual toggle switch on 4400 control disables all automatic and remote control functions
	Digital Inputs to the 4400 control
1	Close Inhibit Trip Inhibit Neutral Current Status VT Wire Neutral Current Protection Anti-Hunt Last Switch Opn. Command	Inhibit/Clear Inhibit/Clear Lockout/Clear Line-Neut/Line-Line Enabled/Disabled Enabled/Disabled Trip/Close
	Analog Inputs from the 4400 control
1	- Voltage, secondary (V) - Last Delta E (V) - Current, primary (A) - Power, 3PH (kW) - VAr, 3PH (kVAr) - Power Factor (through web access) - Neutral Current (A) - Temperature deg F - Total Close Count - Close Today Count - Capacitor Control Run time (hrs) - Maximum Close Count per Day Setpoint - Operation Mode - PCC Identification Number	- Neutral Current Sensor Type - Current Sensor Phase - Voltage Transformer Ratio - Phase Rotation - Current Direction (Forward/Reverse) - Current Transformer Ratio - Current Sensor Type - Total Angle Correction (deg) - Reverse Power Control Action - Season # - Primary Control Function - Close Setpoint - Trip Setpoint

Home | About Us | Products | Library | Contact Us